Proxim ORINOCO AP-2000 Manuel d'utilisateur Page 73

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 244
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 72
73
Performing Advanced Configuration
Syslog Heartbeat Status: Enables or disables the sending of heartbeat messages from the AP to the configured
Syslog servers.
Syslog Heartbeat Interval: Specifies the interval (in seconds) at which Syslog Heartbeat messages are sent to
the configured Syslog servers.
Syslog Host Table: This table specifies the IP addresses of a network servers that the AP will send Syslog
messages to. Click Add to create a new entry. Click Edit to change an existing entry. Each entry contains the
following field:
IP Address: Enter the IP Address for the management host.
Comment: Enter an optional comment such as the host name.
Status: The entry is enabled automatically when saved (so the Status field is only visible when editing an
entry). Disable or delete entries by changing this field’s value.
Syslog Messages
The following messages are supported in the AP:
Message Severity
Auto Configuration via DHCP Informational
Auto Configuration for static IP Informational
TFTP server IP/Config filename missing in DHCP response Minor
AutoConfig TFTP server IP address used is <IP address> Informational
AutoConfig filename used is <filename> Informational
AutoConfig TFTP download failed Minor
Image Error check, invalid image Minor
AP Heartbeat status Minor
Client Authentication State Informational
Accounting Informational
RADIUS Responses Informational
Vue de la page 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 243 244

Commentaires sur ces manuels

Pas de commentaire