Proxim Harmony 802.11a Network Adapter 802.11a Guide de l'utilisateur télécharger pdf (Page 26)

Configuration 26

Note: To check a computer’s IP address assignment, open a Command Prompt

window and type ipconfig.

4. If you are using a computer equipped with an 802.11a wireless adapter, be sure it

is configured to connect to an Access Point as follows:

• SSID: any

• Mode: Infrastructure

• Security Level: No Security

5. Open a Web browser such as Microsoft Internet Explorer 5 on the computer.

6. In the Address box, enter the IP Address of the Access Point (such as 192.168.0.2)

and press Enter.

7. The Status screen of the Harmony 802.11a Access Point’s Web configuration tool

appears.

Note: If a message appears that states: “Please use an Access Point Controller to

manage this Access Point,” you either have an AP Controller on the network

or the AP is looking for an AP Controller. If you just rebooted the AP, wait

until the AP’s Status LED blinks green and then type in the AP’s IP address

again.

8. Select either the Configure or Statistics tab at the top of the screen.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 57 58

Pas de commentaire

Proxim Harmony 802.11a Network Adapter 802.11a Guide de l'utilisateur Page 26