Proxim ORiNOCO AP-8000 Guide de l'utilisateur télécharger pdf (Page 12)

Installation and Initialization AP-8000 User Guide

Prerequisites

Description of the AP-8000 Unit

Figure 2-3 Schematic Illustration of the Unit

Prerequisites

Before installing your unit, you need to gather certain information. The following table identifies the information you need:

AP’s IP Address If you do not have a DHCP server on your network, then you need to assign the

Access Point an IP address that is valid on your network.

Web Interface/Telnet/CLI User

Name/Password

Each Access Point requires a read/write username and password to access the

web interface, Telnet and CLI. The default username is “admin” and password is

“public”.

SNMP Read Password Each Access Point requires a password to allow get requests from an SNMP

manager. The default username is “admin” and password is “public”.

SNMP Read-Write Password Each Access Point requires a password to allow get and set requests from an

SNMP manager. The default password is “public”.

Security Settings You need to determine what security features you will enable on the Access

Point.

Gateway IP Address and Subnet

Mask

The gateway IP address and subnet mask of the network environment where the

Access Point is deployed.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 168 169

Pas de commentaire

Proxim ORiNOCO AP-8000 Guide de l'utilisateur Page 12