Proxim Harmony 802.11a Guide de l'utilisateur télécharger pdf (Page 26)

RJ-45 Output Plug (per channel) — Access Point Side

Use two standard straight-through Ethernet cables that include all 8 wires (4 pairs) to

connect the Harmony Power System to a network hub/switch and to an AP Power Over

LAN Module or Harmony 802.11a/802.11b Access Point. Figure 6 illustrates this type

of connection for an 802.11b Access Point.

Figure 6: Cable Pin-out Model for Access Point Connection to the Power System

Pin Number Description

1 Rx Data Signal from Access Point

2 Rx Data Signal from Access Point

3 Tx Data Signal to Access Point

4DC power

5DC power

6 Tx Data Signal to Access Point

7DC power

8DC power

9 Connector shielding

1 2 ... 21 22 23 24 25 26 27 28 29 30 31

Pas de commentaire

Proxim Harmony 802.11a Guide de l'utilisateur Page 26