Proxim RangeLAN2 7500 Guide de l'utilisateur télécharger pdf (Page 11)

2. Quick Installation

You may follow the quick installation steps if the following

conditions are true:

❑ There will only be one RangeLAN2 7500 on this

network

❑ You will use all the software default values (MASTER,

domain 0, IP address 192.0.1.2)

❑ You will not be setting security IDs on your network

❑ All RangeLAN2 computers are configured as STATIONs

or ALTERNATE MASTERs

If your installation meets the preceding criteria, proceed with the

following instructions:

1. Insert the floppy diskette labeled “Access

Point” into the drive on the front of the

RangeLAN2 7500. You can ignore this

step if you are using a RangeLAN2 7501.

2. Firmly screw the end of the RangeLAN2

antenna cable onto the antenna connector at

the back of the RangeLAN2 7500

clockwise.

Note

FCC regulations mandate that the RangeLAN2 7500

antenna not be alterable. Therefore, RangeLAN2

7500 uses a custom antenna connector. Do not

attempt to use a different antenna or you may damage

the connector and the RangeLAN2 7500 unit.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 71 72

Pas de commentaire

Proxim RangeLAN2 7500 Guide de l'utilisateur Page 11