Proxim ORINOCO AP-2000 Manuel d'utilisateur télécharger pdf (Page 141)

141

Using the Command Line Interface (CLI)

Example 3 - Modify a table entry or row

Use the index to be modified and the table elements you would like to modify. For example, suppose the IP Access

Table has one entry and you wanted to modify the IP address:

[Device-Name]>set mgmtipaccesstbl 1 ipaddr 10.0.0.11

You can also modify several elements in the table entry. Enter the index number and specific table elements you would

like to modify. (Hint: Use the search Command to see the elements that belong to the table.)

[Device-Name]>set mgmtipaccesstbl 1 ipaddr 10.0.0.12 ipmask 255.255.255.248

cmt “First Row”

Example 4 - Enable, Disable, or Delete a table entry or row

The following example illustrates how to manage the second entry in a table.

Syntax:

[Device-Name]>set <Table> index status <enable, disable, delete>

[Device-Name]>set <Table> index status <1=enable, 2=disable, 3=delete>

Example:

[Device-Name]>set mgmtipaccesstbl 2 status enable

[Device-Name]>set mgmtipaccesstbl 2 status disable

[Device-Name]>set mgmtipaccesstbl 2 status delete

[Device-Name]>set mgmtipaccesstbl 2 status 2

NOTE

You may need to enable a disabled table entry before you can change the entry’s elements.

Example 5 - Show the Group Parameters

This example illustrates how to view all elements of a group or table.

Syntax:

[Device-Name]> show <group name>

Example:

[Device-Name]>show network

Result: The CLI displays network group parameters. Note show network and show ip return the same data.

Figure A-10 Results of “show network” and “show ip” CLI Commands

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 243 244

Pas de commentaire

Proxim ORINOCO AP-2000 Manuel d'utilisateur Page 141