Proxim ORINOCO AP-2000 Manuel d'utilisateur télécharger pdf (Page 98)

Performing Advanced Configuration

Figure 4-34 SSID/VLAN Edit Entries Screen (VLAN Protocol Enabled)

4. Enter a unique Network Name (SSID), between 1 and 32 characters. This parameter is mandatory.

5. Enter a unique VLAN ID. This parameter is mandatory.

– You must specify a unique VLAN ID for each SSID on the interface. A VLAN ID is a number from -1 to 4094. A

value of -1 means that an entry is “untagged.”

– You can set the VLAN ID to “-1” or “untagged” if you do not want clients that are using a specific SSID to be

members of a VLAN workgroup. Only one “untagged” VLAN ID is allowed per interface.

– The VLAN ID must match an ID used by your network; contact your network administrator if you need

assistance defining the VLAN IDs.

6. If editing an entry, enable or disable the VLAN using the VLAN Status drop-down menu. If adding, this drop-down

menu will not appear.

7. Enable or disable the SSID Authorization status from the drop-down menu.

SSID Authorization is the RADIUS based authorization of the SSID for a particular client. The authorized SSIDs

are sent as the tunnel attributes.

8. Enable or disable RADIUS accounting on the VLAN/SSID under the Accounting Status drop-down menu.

9. Enable or disable RADIUS MAC authentication status on the VLAN/SSID under the RADIUS Authentication

Status drop-down menu.

10. Enable or disable MAC Access Control List status on the VLAN/SSID under the MAC ACL Status drop-down

menu.

11. Enter the Rekeying Interval in seconds. The default interval is 900 seconds.

12. Enter the Security Profile used by the VLAN in the Security Profile field.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 243 244

Pas de commentaire

Proxim ORINOCO AP-2000 Manuel d'utilisateur Page 98