Proxim 7910 Guide de l'utilisateur télécharger pdf (Page 83)

Go To Standby

Purpose: The purpose of this command is to place the Serial

Adapter in Standby mode in order to conserve current. For this

command to work properly, the RTS line at the Serial Adapters

serial connector must be inactive. The Serial Adapter can be

removed from Standby mode by asserting the RTS line.

Response Expected from Serial Adapter = None.

Message format:

BYTE command (ASCII ‘G’, 47H)

Initialize Serial Adapter

Purpose: To initialize the Serial Adapter.

Response Expected from Serial Adapter: “Initialization Confirma-

tion”

Message Format:

BYTE command (ASCII ‘I’, 49H)

BYTE seqno

Set Radio Channel

Purpose : To set the Serial Adapter’s radio channel.

Response Expected from Serial Adapter: “Radio Channel Confir-

mation”

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 126 127

Pas de commentaire

Proxim 7910 Guide de l'utilisateur Page 83