Proxim 7910 Guide de l'utilisateur télécharger pdf (Page 88)

The StatusInd field does not show whether the destination node

has received the message.

Message Format:

BYTE response (ASCII ‘t’, 74H)

BYTE seqno (from original command)

BYTE len H (from original command)

BYTE len L (from original command)

BYTE destaddr H (from original command)

BYTE destaddr 3 (from original command)

BYTE destaddr 2 (from original command)

BYTE destaddr L (from original command)

BYTE StatusInd

The valid values of the StatusInd field are as follows:

00H: Successful Transmission to the TCP/IP stack

01H: Transmission Error

Signal Strength Report

Purpose: This packet is generated by the Serial Adapter in re-

sponse to a Request Radio Signal Strength command. The packet

contains the signal strength value for the Serial Adapter’s current

radio channel. The signal strength value range from 00H to FFH.

A value of FFH signifies maximum signal strength.

Message Format:

BYTE response (ASCII ‘r’, 72H)

BYTE seqno (from original command)

BYTE Signal strength on current channel

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 126 127

Pas de commentaire

Proxim 7910 Guide de l'utilisateur Page 88