Proxim 7910 Guide de l'utilisateur télécharger pdf (Page 89)

Serial Adapter Version Report

Purpose: This packet is generated by the Serial Adapter in re-

sponse to a Request Serial Adapter Version command. The

packet contains the 4-byte IP address of the Serial Adapter, along

with the Version string and a code indicating the radio type.

Message Format:

BYTE response (ASCII ‘v’, 76H)

BYTE seqno (from original command)

BYTE IPaddr H ;Serial Adapter’s IP Address

BYTE IPaddr 3

BYTE IPaddr 2

BYTE IPaddr L

7 BYTES string (7 byte ROM version number string)

BYTE Radio Type(03= RangeLAN2 Extended Range)

Standby Confirmation

Purpose: This packet is generated by the Serial Adapter after a

Go To Standby command is received from the External Com-

puter. Immediately after generating this response, the Serial

Adapter enters standby mode. The Serial Adapter can only be

removed from standby mode by asserting the RTS input signal.

Message Format:

BYTE response (ASCII ‘g’, 67H)

Initialization Confirmation

Purpose: This packet is generated by the Serial Adapter after an

Initialize Serial Adapter command is received from the External

Computer. For convenience, the packet contains the physical

address of the Serial Adapter.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 126 127

Pas de commentaire

Proxim 7910 Guide de l'utilisateur Page 89